7.28.9.3
Changing drive parameters
The parameter values are displayed via the tab in the "Parameter" display area. Each list
created is displayed as a separate tab.
The parameter display is updated regularly.
To change the parameter values of a parameter list, you need the appropriate change rights
(see Access rights for parameter lists (Page 398)). An existing access and password
protection also applies.
Note
You can find detailed information about the following parameters in the SINAMICS
S120/S150 List Manual in Section "Parameters for write protection and know-how
protection":
• Parameters that can be changed with active know-how protection,
• Parameters that can only be read with active know-how protection,
Generally, only those parameter values in the parameter list can be changed for which there
is a "Change" button to the right of the line.
Requirement
● The required parameter list is created in the Web server.
Drive functions
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
see Section "Parameters with KHP_WRITE_NO_LOCK"
see Section "Parameters with KHP_ACTIVE_READ"
Basic functions
7.28 Web server
415