Service And Repairs; Drive Chain Idler Arm (Greenspro 1240) - Toro GreensPro 1240 Service Manual

Service and Repairs

Drive Chain Idler Arm (GreensPro 1240)

Removing the Drive Chain Idler Arm
GreensPro ™ 1240/1260
14211SL Rev A
1. Park the machine on a clean, level surface with the transport wheels in the
raised and locked position. Shut off the engine. Engage the parking brake if
equipped, or remove the spark plug wire from the spark plug.
2. Remove the transmission cover from the machine; refer to
Transmission Cover (page
3. Remove the hex nut (item 1 in
from the idler adjustment rod.
g241025
1. Hex nut
2. Spacer
3. Compression spring
4. Idler adjustment rod
5. Bolt
4. Remove the bolt, flat washers, locknut, pivot bushing, and spacer that secure
the idler arm to the chassis, and remove the idler arm assembly
7–59).
Figure 63), spacer, and compression spring
Figure 63
6. Flat washer (2 each)
7. Locknut
8. Pivot bushing
9. Spacer
10. Idler arm assembly
Page 7–13
Removing the
(Figure 64).
Chassis: Service and Repairs