Testing The Electrical Components - Toro GreensPro 1240 Service Manual

Testing the Electrical Components

Electrical System: Testing the Electrical Components
Some of the electrical system components used on GreensPro machines
are part of the Honda engine. These components include the engine
O /O switch, ignition module, lighting coil, Oil Alert™ unit, and oil level
N FF
switch. Service information for these components can be found in the Honda
Engine Service Manual. Contact your local Honda Engine Dealer or visit
http://engines.honda.com
The following are testing procedures for the remainder of the electrical system
components used on GreensPro machines. The components include the hour
meter, worklight switch, and on machines above serial number 315000000, a
seat switch, neutral switch, parking brake switch, resistor assembly, and interlock
module.
Note: For accurate resistance and/or continuity checks, electrically disconnect
the component being tested from the circuit (e.g., unplug the seat switch
connector before doing a continuity check of the switch).
for assistance.
Page 6–14 GreensPro ™ 1240/1260
14211SL Rev A