Siemens SCALANCE W1780 Configuration Manual page 354

Appendix D
D.2 Messages in the WLAN Authentication Log
Alarm
VAP<number> Client <MAC> failed to authenticate; status
(<status>)
VAP<Num>: Client <MAC> failed to disassociated; status
(<text>)
VAP<Num>: Client <MAC> associated successfully
RADIUS: Access rejected for client <MAC>
RADIUS: Access accepted for client <MAC>
WDS Connection is established to AP <MAC>
WDS disconnect from AP <MAC>
Messages in client mode
Alarm
Associated successfully to AP <MAC address> <system
name> at channel <channel number> (frequency <frequen‐
cy> MHz)
Disassociated from AP <MAC address> <'sys name'> with
reason (Disassociated because sending STA is leaving (or
has left) BSS)
Failed to authenticate to AP <MAC>; status (<Text>)
Failed to disassociate from AP <MAC>; status (<Text>)
Failed to associate to AP <MAC>; status (<Text>)
354
Description
The authentication of the client failed. The reason is displayed
as text.
The connection of the client could not be terminated. The reason
is displayed as text.
The client has connected successfully to the VAP or the client
has logged on successfully to the VAP.
The RADIUS server denies the client access.
The RADIUS server allows the client access.
The WDS connection is successfully established to the access
point.
The WDS connection to the access point is terminated.
Description
The client has logged in successfully on the access point.
The client was logged off from the access point.
The authentication of the client with the access point failed. The
reason is displayed as text.
The connection of the client to the access point could not be
terminated. The reason is displayed as text.
The connection of the client to the access point has failed. The
reason is displayed as text.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03