Overview Client - Siemens SCALANCE W1780 Configuration Manual

Industrial wireless lan
Table of Contents

Advertisement

Configuring with Web Based Management
6.4 "Information" menu
● MAC Address
Shows the MAC address of the virtual access point.
● SSID
Shows the SSID.
● PMF
Shows whether the management frames are cryptographically protected.
– disabled
– required
– optional
● Security
Shows which authentication method is used.
If the authentication method "Open System + Encryption" or "Shared Key" is used,
"Encrypted (WEP/AES)" is displayed for both authentication methods.
● State
Shows the status of the WLAN interface.
– enabled
– disabled
6.4.16.2

Overview Client

Overview of the configuration
Note
This page is only available for clients or access points in client mode.
The page shows an overview of the existing clients and their configuration.
120
The management frames are not encrypted.
The management frames are always encrypted. A connection of the WLAN clients to the
access point is only possible when these also support PMF.
The management frames are encrypted or unencrypted depending on support of the
WLAN client.
The WLAN interface is enabled.
The WLAN interface is disabled.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scalance w1740Scalance w1780 seriesScalance w1740 seriesScalance w1788-2 m12 eecScalance w1788-1 m12Scalance w1788-2 m12 ... Show all

Table of Contents