Table of Contents
Advertisement
Page
Ver.
Item
Others
CHU Color Bars
Filter WHT MEM
Rotation
ID On Bars
Date On Bars
Time On Bars
Zoom Disp
HKC-7080
Settings
On, [Off]
[On], Off
[STD], RVS
On, [Off]
On, [Off]
On, [Off]
Left, [Right]
Contents
Turns the camera color-bar signal output on and off
(Does not function in this unit )
Selects the mode of MENU SELECT control (as turned
clockwise)
STD: Cursor moves downwards and a numeric value increases
RVS: Cursor moves upwards and a numeric value decreases
Selects whether the camera ID is mixed with a camera output
signal in the color-bar mode, or not (This setting is valid only
when the DISPLAY switch is set to ON or OFF)
Selects whether the date characters are mixed with a camera
output signal in the color-bar mode, or not (This setting is valid
only when the DISPLAY switch is set to ON or OFF)
Selects whetehr the time characters are mixed with a camera
output signal in the color-bar mode, or not (This setting is valid
only when the DISPLAY switch is set to ON or OFF)
Changes the indication locations of the zoom and focus
positions' status displayed on the VF each other
Left: Zoom position is located on the left and focus position is
on the right
Right: Zoom position is located on the right and focus position is
on the left
3-1. Setup Menu
3-1-6. SYS Config Menu
3-17 (E)
Advertisement
Table of Contents
