Table of Contents
Advertisement
3-1. Setup Menu
3-1-6. SYS Config Menu
3-1-6. SYS Config Menu
The SYS Config menu is used to set operating mode of the tally lamps or to make adjustments of limited
service.
To activate the SYS Config menu, first display the TOP menu.
Page
Ver.
Item
Tally
Own Call
F Tally RVS
(Back Tally)
R Tally
G Tally
Up Tally Level
Filter CTRL
Pixel
Auto
REF DC
Manual R
Manual G
Manual B
APR at ABB
h) Rear tally lamp refers to back tally lamp and VF tally lamp (of HDVF-700).
k) Front tally lamp refers to up tally lamp and lens tally lamp.
3-16 (E)
Settings
R, F&R , Off
[On], Off
[On], Off
[On], Off
0 to 10 ([5])
[Lock], Unlock
Throw MENU SELECT
switch to ENTER to execute
00 to FF ([80])
Throw MENU SELECT
switch to ENTER to execute
On, [Off]
Contents
Selects whether tally lamps are lit or not, or which tally lamp is
lit when the CALL switch on the rear panel is pressed (This
setting is valid only when the HDCU is connected to the
camera. When the camera is used alone without being
connected to RCP/MSU, this setting is turned off regardless of
the menu indication )
R:
One or two rear tally lamps
h)
k)
R&F: Both rear
and front
tally lamps are lit
OFF: No tally lamp is lit
Tally lamps stay lit while the tally signal is input from the HDCU
or VTR
This item selects the operating mode of the tally lamps when a
CALL button of MSU or RCP is pressed while lit
On: Both rear
h)
and front
k)
tally lamps go out
h)
Off: Rear
tally lamps alone go out
Turns on and off the function to light up the back tally lamp
when the R tally singal is input
Turns on and off the function to light up the back tally lamp
when the G tally singal is input
Sets the intensity of the up tally lamp
Lock:
ND/CC filter cannot be selected when the R tally signal
is input
Unlock: ND/CC filter can be selected even though the R tally
signal is input
Starts to automatically correct RPN (Activates APR function )
Sets the APR detection level
Enters a manual correction mode for RPN
Turns on and off the function to activate the APR each time the
black balance is automatically performed
h)
are lit
HKC-7080
Advertisement
Table of Contents
