Table of Contents
Advertisement
3-1. Setup Menu
3-1-2. Paint Menu
Page
Ver.
Item
Low-Key SAT
LK CLP LVL
LK Saturation
Clear
Shutter
Shutter/ECS
ECS
S-EVS
Scene File
1
2
3
4
5
File Store
Standard
3-10 (E)
Settings
_99 to 99 ([0])
On, [Off]
Throw MENU SELECT
switch to ENTER to execute
On, [Off]
1/100, [1/125], 1/500,
1/1000, 1/2000, ECS
30.0 to 7000 ([30.0]) Hz
On, [Off]
0 to 100 ([0]) %
Storing and recalling a scene file (painting data corresponding to a shot scene)
Storing a scene file
1. Turn MENU SELECT control to move the → cursor to "File Store", then throw MENU
SELECT switch to ENTER "File Store" flashes on the viewfinder screen
2. Select the file number (1 to 5)
(If data is already stored at the selected file, the new data replaces the current data)
Recalling a scene file
Turn MENU SELECT control to move the → cursor to the desired file number, then throw
MENU SELECT switch to ENTER
. Every time MENU SELECT switch is thrown to ENTER, the scene file replaces the current
settings
. When the scene file is recalled, an asterisk appears next to the number
Returns the current amount of paint adjustments and switch setting to their reference values
Contents
Adjusts the chroma level at a point where the luminous intensity
of a object is low
Turns the above-mentioned LK CLP LVL function on and off
Resets numeric settings on the Low-Key SAT page to 0
(When you throw MENU SELECT switch to ENTER, the "Clear"
indication flashes. Throw MENU SELECT switch to ENTER
again to execute; throw to CANCEL to cancel)
Turns the shutter/ECS mode on and off
Selects the shutter speed
Sets the ECS frequency
Turns the S-EVS mode on and off.
Sets the desired resolution in %
HKC-7080
Advertisement
Table of Contents
