Table of Contents
Advertisement
3-1. Setup Menu
3-1-4. File Menu
3-1-4. File Menu
The File menu stores and clears the adjustment values or setting values stored in the Reference, OHB,
Operator and Lens files.
To activate the File menu, first display the TOP menu.
Page
Ver.
Item
Reference File
Store File
Clear File
10sec Clear
OHB File
Store File
Operator File
Store Preset File
Clear Preset File
Lens File
File
F Stop
Store File
Clear Current File Throw MENU SELECT
Center H POS
Center V POS
Center POS Store Throw MENU SELECT
3-14 (E)
Settings
Throw MENU SELECT
switch to ENTER to execute
Throw MENU SELECT
switch to ENTER to execute
On, [Off]
Throw MENU SELECT
switch to ENTER to execute
Throw MENU SELECT
switch to ENTER to execute
Throw MENU SELECT
switch to ENTER to execute
1 to [16]
F1.0 to F3.4 ([F1.5])
Throw MENU SELECT
switch to ENTER to execute
switch to ENTER to execute
_20 to 20 ([0])
_20 to 20 ([0])
switch to ENTER to execute
Contents
Stores the reference values used for automatic setup
adjustment and the standard settings of the switches as the
reference files
m
. When executing the Store File on the Reference File page,
settings of items which have been set just before the file store
through the Paint, Maintenance and SYS Config menus are
registered as the reference values
. If changed values is to be returned to the reference values
stored in the reference files, recall the standard file using an
MSU/RCP or the setup menu
Clears the adjustment values stored as the reference files
(Temporarily clears the current reference files)
n
If the unit is powered off without execution of the Store File
after clearing the file, the original setting is restored
Turns on and off the function to clear the reference value by
continuing to push up MENU SELECT switch to ENTER more
than ten seconds
(With 10 sec Clear set at On, move the cursor to a menu item to
be cleared, and push up the MENU SELECT switch to ENTER
more than ten seconds while "?" is brinking. The reference item
can be cleared)
n
The setting is returned to Off when the unit is powered off
When the unit is powered off without execution of the Store File
after the file is cleared, the original setting is restored
Stores specific data for a CCD unit to be used as the OHB files
The standard values are stored at the factory (Stores the white
offset value for ND filter, OHB matrix data and so on )
Stores the user's preset values of the operator file
Returns the preset values of the operator file to their factory
settings
Selects a lens file appropriate for a mounted lens from 16 kinds
of the lens files
Sets a stop number of a lens
Stores the adjustment value on each item (except the location
of the center marker) as the lens file
Returns the selected lens file to the factory setting
Shifts horizontally the location of the center marker on the
screen
20 (right) ↔ _20 (left)
Shifts vertically the location of the center marker on the screen
20 (down) ↔ _20 (up)
Stores the location of the center marker at present in the
selected lens file number
HKC-7080
Advertisement
Table of Contents
