UNIVERGE SV8100
System Hardware Manual
2.
Locate the door positioned on the left end
(expansion bay) of the Controlling Chassis.
Expansion Bay
Figure 3-35 PZ-BS10 Expansion Bay in Controlling Chassis
3.
From the right side of the door, pinch the door clip
and pull the cover outward to expose the expansion
bay.
Figure 3-36 Open Base Chassis Cover
4.
Pull the cover toward you to remove.
Cover must be removed prior to installation of PZ-BS10
blade.
Issue 2.0
Door Clip
3 - 31