Table 5-16 Line Key Kit Type - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual
Ten Key Kit Entry
7.
8.
Line Key Kit Entry
9.
10.
5.2.5 Installing the Directory Card on the Multiline Terminal
A directory card can be attached to DT300/DT700 Series multiline
terminals. The directory card can be used to record often dialed numbers or
other important information.
1. After recording the information on the lined insert, reinsert it between
the plastic panels of the directory card. Attach the directory card to
the directory card holder as illustrated in
Directory Card to Directory Card Holder on page
slides into the directory card holder.
Table 5-15 Ten Key Kit Type (Continued)
Kit3 Type B – US with cursor key
Kit4
Kit8 32 Line Key without cursor key
Kit9
Type A – Japan without cursor key
Kit10 Type A – US without cursor key
Kit11 Type B – US without cursor key
Kit12
Press Softkey 4 for Next.
Press the Up/Down key to select the Line Key kit.
By default, the correct line key kit for the keypad kit

selected above is highlighted.

Table 5-16 Line Key Kit Type

Kit12
Enhanced 12-Button
Kit24 Enhanced 24-Button
Kit32 Enhanced 32-Button
Kit8 DESI-Less
Kit6 Value 6-Button
Kit2 Value 2-Button
Kit0 IP-CTS
Press Softkey 4 for OK to complete.
Continue pressing Softkey 4 to exit (Exit-Exit-Save). The
terminal resets automatically.
Description
Description
Figure 5-81 Attaching
5-78. The open end
5-77