S
4
W
ECTION
ALL
4.1
3-38
M
C
OUNTING THE
Wall Mounting the 19" (CHS2UG-US) Chassis
When wall mounting the chassis, ensure the wall can support the weight of the
chassis (55 lbs per system chassis – including blades, cords, power supply, etc.).
The chassis is secured to the wall with a wall mount bracket. Ensure that enough
space is available to allow the installation of additional expansion chassis.
4.1.1
CHS2UG-US Chassis Wall Mount Installation
TIP
1.
Use the template shown in
(19" Chassis) on page 3-39
HASSIS
Plywood should first be installed on the wall where the
❍
chassis will be positioned. This allows secure
anchoring of the screws which support the weight of
the chassis.
Due to chassis weight, NEC recommends only a single
❍
CHS2UG-US chassis per wall mount.
Figure 3-46 Wall Mount Spacing Guide
for required spacing before drilling.
Issue 3.0
Installing the SV9100 Chassis