Table of Contents
Advertisement
Damage from falling objects.
Take care not to damage the ProLine element when fitting wall units or a
rangehood above it.
Fit the wall units and the rangehood before the ProLine appliance.
The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any splashbacks must be of heat-resistant
material.
An electric fryer must not be installed directly next to a gas
cooktop as the gas flames could ignite the fat in the fryer. It is
essential to maintain a distance of at least 288 mm between these
two appliances.
The ProLine element must not be installed over a fridge, fridge-
freezer, freezer, dishwasher, washing machine, washer-dryer or
tumble dryer.
When installing the ProLine element, make sure that the gas hose/
pipe and mains connection cable cannot come into contact with hot
appliance parts.
The mains connection cable and any flexible gas connection pipes
must be installed in such a way so that they do not come into
contact with any moving kitchen parts (e.g. a drawer) after the
ProLine element has been installed, and that they cannot be
subjected to any mechanical action which could cause damage.
Carefully observe the safety clearances listed on the following
pages.
All dimensions in this instruction booklet are given in mm.
Safety instructions for installation
35
Advertisement
Table of Contents
