8.3.4
HMI
In the Configure tab, you can view and, if necessary, edit the display settings. You can select these parameters
in the HMI menu in the navigation window. The menu contains the following elements:
•
Display settings
•
User-defined screen
8.3.4.1 Display Settings
Default Settings and Setting Ranges
Table 8-8
Parameter
Contrast
Time until dimmed
Refresh time
Inverse display
Phase label
Use password
Parameterizing the Display Settings
To change the properties of the display, proceed as follows:
✧
In the navigation window, select the HMI menu and click LCD Property.
Figure 8-39
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Display Settings
Default Setting
8
10
1 000
no
(L1,L2,L3)
yes
Configure Tab, Display Settings Input/Output Window
8 Operation at Use of a PC
8.3 Configuration of the Device
Setting Range
0 to 10
1 min to 99 min
330 ms to 3 000 ms
no
yes
(L1,L2,L3)
(a,b,c)
no
yes
157