Siemens SINUMERIK 840D sl Turning Operating Manual page 613
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
β=90° represents a rotation of the cutting plate by +Y.
Mirroring
A mirroring of the Z axis (e.g. on the counter-spindle) for β=0° / γ=0° causes the same
machining in the mirrored coordinate system.
The mirroring of the Z axis must be permanently activated in a work offset.
The cutting edge position is calculated using the CUTMOD function.
Turning
Operating Manual, 06/2019, A5E44903486B AB
Programming technology functions (cycles)
10.6 Further cycles and functions
613
Advertisement
Table of Contents
