Main spindle
Dimensioning, main spindle jaw
type 1
①
Stop edge
②
Front edge
Counter-spindle
You can measure either the forward edge or stop edge of the counter-spindle. The forward
edge or stop edge automatically serves as the valid reference point when traversing the
counter-spindle. This is especially important when gripping the workpiece using the counter-
spindle.
Dimensioning, counter-spindle jaw type 1
①
Stop edge
②
Front edge
Turning
Operating Manual, 06/2019, A5E44903486B AB
4.9 Monitoring axis and spindle data
Dimensioning, main spindle jaw type 2
Dimensioning, counter-spindle jaw type 2
Setting up the machine
127