2-Window - Siemens SINUMERIK 840D sl Turning Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Changing the display
You can increase or decrease the size of the simulation graphic, move it, turn it, or change the
segment.
Displaying and moving cutting planes
You can display and move cutting planes X, Y, and Z.
See also
Defining cutting planes (Page 256)
7.5.5
2-window
Displaying a 2-window view
Changing the display
You can increase or decrease the size of the simulation graphic and move it, as well as change
the segment.
Turning
Operating Manual, 06/2019, A5E44903486B AB
Software option
You require the option "3D simulation (finished part)" for the simulation.
1.
Simultaneous recording or simulation is started.
2.
Press the "Further views" and "2 windows" softkeys.
The 2-window view contains a side view (left-hand window) and a front
view (right-hand window) of the workpiece. The viewing direction is al‐
ways from the front to the cutting surface even if machining is to be per‐
formed from behind or from the back side.
Simulating machining
7.5 Different views of the workpiece
247
Advertisement
Table of Contents
