Siemens SINUMERIK 840D sl Turning Operating Manual page 287
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Graphic view
The graphic view shows the contour of the workpiece as a dynamic graphic with broken lines.
The program block selected in the work plan is highlighted in color in the graphic view.
Figure 9-2
Parameter screen with help display and graphic view
Note
Switching between the help screen and the graphic view
The key combination <CTRL> + <G> is also available for the switchover between the help
screen and the graphic view.
Turning
Operating Manual, 06/2019, A5E44903486B AB
Graphic view of a ShopTurn program
1.
Press the <Cursor right> key to open a selected program block or
cycle in the work plan.
The associated parameter screen with help display is then dis‐
played.
2.
Press the "Graphic view" softkey.
The graphic view of the selected program block is displayed.
Creating a ShopTurn program
9.2 Program views
287
Advertisement
Table of Contents
