Table of Contents
Advertisement
Every Month on Day: Check this check
box and select the day from the drop-
down list to have e-mail sent on the
selected day every month. The report
contains product information, owner
information, hours of use, lamp mode,
memos, etc.
Maintenance Report
Lamp Reminder: Check this check box and
enter the replacement time of the
projector lamp in the text box. This
information is used to have e-mail sent
informing you that lamp replacement is
required when the preset time has
reached. You can specify the time
between 1 and 9999 hours.
Maintenance Reminder: Check this check
box and enter the time of use before
maintenance is required for the projector
in the text box. This information is used
to have e-mail messages sent informing
you that maintenance of the projector is
required when the preset time has
reached. You can specify the time
between 1 and 99999 hours.
The length of time that elapsed since you
reset is displayed in the Elapsed Hours
text box. Checking the RESET check
box and clicking [Apply] resets the
elapsed time to zero.
x Address field
Email Address
Enter the e-mail address to which you wish
e-mail messages sent in each text box. You
can have e-mail sent to four different
addresses at the same time. You can enter up
to 64 characters for each address.
Report Timing
Regular: Check this check box to have the
Regular Report sent.
Maintenance: Check this check box to have
the Maintenance Report sent.
Error: Check this check box to have an
error report sent when any trouble
occurs with the projector.
Notes
• Even if days are specified in the Report
Timing field, the Regular Report will not be
34
Monitoring and Operating the Projector Using a Web Browser
sent if you do not check the Regular check
box. If the day preset in [Every Month on
Day] does not exist in the month, you will
receive the Regular Report on the last day of
the month.
• You cannot specify the day of the week or
day of the month if the [Every Week on
Days] or [Every Month on Day] check box is
not checked.
x Mail Form field
Select the e-mail message type from
[Standard] or [Simple].
x Mail Account field
Mail Address: Enter the appropriate e-mail
address. You can enter up to 64
characters.
Outgoing Mail Server (SMTP): Enter the
address of the SMTP server. You can
enter up to 64 characters.
Required Authentication: Check this
check box if authentication is required
for sending e-mail.
Requires the use of POP Authentication
before send e-mail (POP before
SMTP): Check this check box to
arrange for POP authentication to be
performed before connecting to the
SMTP server.
Incoming Mail Server (POP3): Enter the
address of the POP3 server.
Account Name: Enter the mail account.
Password: Enter the mail password.
SMTP Authentication: Check this check
box to arrange for SMTP authentication
to be performed before connecting to the
SMTP server.
Account Name: Enter the mail account.
Password: Enter the mail password.
Send test mail: Check the Send check box
then click [Apply] to have e-mail
messages sent as a test to confirm
whether it is sent to the specified
addresses.
Notes
• If the following items have not been set or
are incorrectly set, an error message
appears and the test mail is disabled:
– [Address] in the Address field
– [Mail Address] and [Outgoing Mail Server
(SMTP)] in the Mail Account field
Advertisement
Table of Contents
