Operating The Computer-Control; Setting The Network Information - Sony 4-125-572-12 (1) Operating Instructions Manual

Operating the Computer—
Control
Click [Control].
You can control the projector on the
computer. The functions of the buttons
shown in the window are the same as those
of the keys on the supplied remote
commander.
You can switch the Control window between
the [Easy Mode] and [Advanced Mode]
windows. The [Easy Mode] window shows
only the commonly used buttons, while the
[Advanced Mode] window shows all the
buttons on the remote commander.
Clicking [Advanced] opens the [Advanced
Mode] window.
The [Easy Mode] window is restored by
clicking [Easy] in the Control window.
Setting the Network
Information
Click [Network].
You can change the wireless network or
wired network (VPL-DX15 only) setting.
After you change a setting, it will be
reflected in the projector if you click [Apply]
at lower part of the window.
Note
When the network setting is changed, the
network may have been disconnected.
Monitoring and Operating the Projector Using a Web Browser
31