Introduction; Product Description - GE MDS 4790 Series Installation & Operation Manual

MDS 05-3438A01, Rev. F
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8457-MDS-UP-9790X.aspx

1.0 INTRODUCTION

This guide presents installation and operating instructions for the
MDS 4790 and MDS 9790 Series Master Station Radio. It begins with
an overall description of radio features and is followed by the steps
required to install the unit and place it into normal operation.
Additionally, the guide contains troubleshooting tips for resolving
system difficulties that you might encounter. After you install the radio,
keep this guide near the radio for future reference.

2.0 PRODUCT DESCRIPTION

The master station radio
suitable for use in Multiple Address System (MAS) and Supervisory
Control and Data Acquisition (SCADA) applications. The radio uses
microprocessor control and Digital Signal Processing (DSP) technology
to provide highly reliable communications even under adverse condi-
tions.
The MDS 4790 is intended to be used in systems with compatible
MDS 4710 Series remote radios; it operates in the 400 MHz frequency
band (380 to 512 MHz for A and C models; 400 to 480 MHz for E
models). The MDS 4790S uses an over-the-air data rate of 9600 bps.
The MDS 9790 is used with compatible MDS 9710 Series remote
radios, and it operates between 800 and 960 MHz. Radios are available
in either a redundant configuration or a non-redundant configuration.
Refer to Section 2.2, Redundant versus Non-redundant Operation,
beginning on Page 2 for more information.
AC TIV
E
ST BY
AL AR
M
RX AL
R
TX AL
R
AC TIV
LIN E
E
ST BY
AL AR
M
RX AL
R
TX AL
R
LIN E
Figure 1. MDS 4790/9790 Series Master Station
MDS 4790/9790 Series I/O Guide
(Figure 1) is a full-duplex data telemetry radio
Invisible place holder
E N T E
R
E S C A
P E
1