Opt; Owm [Xxxxx]; Own [Xxxxx]; Ptt [0-255] - GE MDS 4790 Series Installation & Operation Manual

400 mhz/900 mhz multiple address system master station radio
Table of Contents

Advertisement

Options Installed
Owner's Message
Owner's Name
Push-to-Talk Keying
Delay
50
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8457-MDS-UP-9790X.aspx

OPT

The
command lists each upgradable option and shows whether it is
OPT
installed (
) or not-installed (
ON
D i a g n o s t i c s : O N
P re m i u m O p t i o n s : O F F
D i g i t a l M o d e m : O N
You can implement several optional features through the use of a soft-
ware "authorization code" that you can purchase from the factory. The
availability of options depends on what hardware is installed and what
features are permitted by the telecommunications regulatory body in
your country. Please contact the factory for further information.

OWM [xxxxx]

The
command allows for display or entry of an optional text mes-
OWM
sage such as the system name. The entry can contain up to 30 characters
and will appear on the default screen of the front panel interface.

OWN [xxxxx]

The
command allows for display or entry of an optional text mes-
OWN
sage such as the site name. The entry can contain up to 30 characters and
will appear on the default screen of the front panel interface.

PTT [0-255]

This command sets or displays the amount of time to wait after the radio
receives a keying signal from either the PTT (Push-to-Talk) or RTS
(Request-to-Send) lines before actually keying the transmitter. Entering
the
command without a parameter displays the timer value associ-
PTT
ated with the keying delay selection. Entering the
parameter ranging from 0 to 255 sets the timer value in milliseconds. A
timer value of zero means that the radio keys immediately following the
keying signal.
The command is applicable for DCE operation, when the radio is keyed
either by the PTT signal or by RTS. The command is not applicable
when the radio is keyed by the
MDS 4790/9790 Series I/O Guide
). For example:
OFF
Set Owner Message
A
B
Page 76
Set Owner Name
A
B
Page 76
Push-to-Talk Delay
A
B
screen,
command.
KEY
MDS 05-3438A01, Rev. F
screen,
screen,
Page 70
command with a
PTT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents