Interconnect Bico Inputs - Siemens SINAMICS S120 Getting Started

4.3.2

Interconnect BICO inputs

Use a connection dialog to connect binector or connector inputs.
Connecting a signal
To make a connection, proceed as follows:
1. Click the binector or connector icon of the signal that you want to connect (
A connection dialog for the selection of the possible parameters opens. The drive object
for which you want to make a connection is displayed automatically in the "Drive object"
drop-down list on the right.
Figure 4-2
The last set signal source is displayed in the "Selected source" field. If a connection was
not available previously, the value 0 is displayed.
Getting Started, 12/2018, 6SL3097-5AG30-0BP0
BICO interconnection dialog
Fundamentals
4.3 BICO interconnections
or ).
53