Inspector Window - Siemens SINAMICS S120 Getting Started

Blocked parameters
Parameters can be locked in the parameter view to prevent changes. In this case, they are
marked with the symbol
● When the parameter has been set by means of a previous basic parameterization (such
as in the device configuration) and a parameter change would take effect later with an
altered structure.
● For parameters that are generally not to be manually changed by the user, for example
because they are parameterized by other programs (such as a controller).
● For parameters that are generally only to be configured in Startdrive via input screens.
The display in the parameter view then only serves as an overview.
3.2.6

Inspector window

Properties and parameters of the selected object are displayed in the Inspector window. You
can edit these properties and parameters. For example, this means that the non-specified
S120 drive objects – newly inserted in the device view – can be specified.
Structure
The information and parameters in the Inspector window are subdivided into various
information types, which are displayed as main tab
● Properties
● Info
● Diagnostics
Figure 3-8 Inspector window
Getting Started, 12/2018, 6SL3097-5AG30-0BP0
. Parameters are always locked in the following cases:
Startdrive commissioning tool
3.2 User interface - parameterization
①
in the Inspector window:
39