The Overview Of The Vf-As3 Monitor Parameters - Toshiba TOSVERT VF-AS3 Instruction Manual

2.6. The overview of the VF-AS3 monitor parameters

[FD01: Inverter status 1]
bit Function
0 Failure FL
1 Failure
2 Alarm
3 Under voltage ([MOFF]) Normal
4 V/f switching status
5 PID control OFF
6 Acc/Dec switching status AD mode 1
7 DC braking
8 Jog run
9 Forward / reverse run
10 Run/stop
11 Coast stop (ST = OFF)
12 Emergency stop
13 Standby ST=ON
14 Standby
HAND/AUTO
15
(LOC/REM)
0
No output Under in progress -
Not tripped Tripped
No alarm Alarm issued
Under voltage
V/f 1 V/f 2
PID control PID control
permitted prohibited
AD mode 2
Forced DC
OFF
braking
OFF Jog run
Forward run Reverse run
Stop Run
ST=ON ST=OFF
No emergency Emergency
stop status stop status
Start-up process Standby
Start-up process Standby
AUTO HAND
(REM) (LOC)
22
1
Trip status includes [rtry] and the
trip retention status is also
regarded as tripped statuses.
-
-
V/f 1: Pt = setting value, vL, vLv, vb, tHrA
V/f 2: Pt = "0", F170, F171, F172, F182
-
AD mode 1: ACC, DEC
AD mode 2: F500, F501
-
-
-
-
-
-
Standby: Initialization completed,
not failure stop status, not alarm
stop status ([MOFF], , [COFF],
[StOP], [LStP]), ST =ON and
RUN=ON
Standby: Initialization completed, not
failure stop status and not alarm stop
status ([MOFF], [COFF], [StOP],
[LStP])
Enabled with [F750] = "2"
HAND: Panel operation is enabled
AUTO: Operation method selected
[CMOd] and [FMOd] are enabled.
Enabled with [F732] = "0"
LOC: Panel operation is enabled
REM: Operation method selected
[CMOd] and [FMOd] are enabled.
E6582125
Note