Setting Ip Address - Toshiba TOSVERT VF-AS3 Instruction Manual

1.6. Setting IP address

This section contains two methods to set the IP address.
One is a method using the DHCP servicer, and the other a method to set manually.
For detail of IP setting parameters, refer to section "0".
To obtain the IP address by using the DHCP server
(1) Select "IP Setting" on Embedded Ethernet setting
screen and set "2: DHCP."
(2) Connect the inverter and the equipment with a DHCP
server function, and reset the inverter.
(3) Check that the IP settings have been obtained by
the monitor display in Embedded Ethernet setting screen.
To set the IP address manually
(1) Select "IP Setting" on the Embedded Ethernet setting
screen and set "0: Fixed."
(2) Set "IP Address", "Mask", "Gateway" to arbitrary values,
and reset the inverter. If you don't know Gateway address,
you may set the value of "0.0.0.0" for "Gateway" setting.
(3) Check that the IP settings have been changed by
Embedded Ethernet setting screen.
STOP
Embedded Ethernet
Device Name
IP setting
IP address
Mask
Gateway
Top
STOP
Embedded Ethernet
Mask
Gateway
IP address monitor
Mask monitor
Gateway monitor
Top
STOP
Embedded Ethernet
Device Name
IP setting
IP address
Mask
Gateway
Top
STOP
Embedded Ethernet
Mask
Gateway
IP address monitor
Mask monitor
Gateway monitor
Top
6
E6582125
0.0Hz
21:19
DHCP
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
Return Monitor
0.0Hz
21:19
0. 0. 0. 0
0. 0. 0. 0
192. 168. 0. 1
255. 255. 255. 0
192. 168. 0. 200
Return Monitor
0.0Hz
21:19
Fixed
192. 168. 11. 10
255. 255. 255. 0
192. 168. 11. 100
Return Monitor
0.0Hz
21:19
255. 255. 255. 0
192. 168. 11. 100
192. 168. 11. 10
255. 255. 255. 0
192. 168. 11. 100
Return Monitor