Connecting Sicam Ak Redundancy System; Configuration - Siemens SICAM AK Manual

2.3

Connecting SICAM AK Redundancy System

This section describes how to connect the CP-6010 and key switch control to the SICAM AK
system.
2.3.1

Configuration


The cable
6010 (cable length 2.5 m).

The cable

The cable
connected to the both systems SICAM AK.
SICAM RTUs, SICAM AK Redundancy
DC2-026-2.07, Edition 10.2016
connects the terminal of CM-6820 (X1 and X2) to X2 terminals of both the CP-
connects the X3 connector of CP-6010-1 to the similar connector of CP-6010-2.
connects the CP-6010 (X1 connector) to Ethernet switch and is further
Unrestricted
Redundancy via CP-6010
93