Sony 3-270-589-12 (1) Operating Instructions Manual page 95

OPERATIONAL FUNCTION [Operational]: Operation
settings
SEARCH ENABLE [> Search ENA]: Specify how to put the
unit into a search mode (jog, shuttle, or variable-speed).
VAR SPD LIMIT [> VAR limit]: Specify whether to limit the
speed of variable speed playback
PREROLL TIME [> Preroll]: Set the preroll time.
AFTER CUE-UP [> After CUE]: Select the operating mode
following cue-up.
ASM POSTROLL [> Postroll]: Specify whether to record
postroll when executing assemble editing
CLIP CONT. REC [> C. CONT. REC]: Select whether to
enable the Clip Continuous Rec function.
FIND MODE [> Find mode]: Specifies what to find when the
NEXT or PREV button is pressed.
DISPLAY CONTROL [Display]: Settings related to display
on the LCD panel of this unit and on an external monitor
CHARA. POSITION [> Chara pos]: Specify the position
where characters appear in the monitor video section and
on external monitors.
CHARA. TYPE [> Chara type]: Select the type of characters
shown in the monitor video section and on an external
monitor.
CHARA. VSIZE [> Chara size]: Specify the vertical size of
character information in the monitor video section and on
an external monitor.
Description
*DIAL DIRECT [>> DIAL]: The unit switches to a search mode
when you press the JOG, SHUTTLE, or VAR button, or
when you turn the jog or shuttle dial (except during
recording).
VIA SEARCH KEY [>> via KEY]: The unit switches to a
search mode when you press the JOG, SHUTTLE, or VAR
button.
*OFF [>> OFF]: –1 to +2 times normal speed
ON [>> ON]: 0 to +1 times normal speed
15 SEC [>> 15 sec] to 0 SEC [>> 0 sec]: The preroll time can
be set in one-second increments to between 0 and 15
seconds.
Factory default setting: 5 SEC [>> 5 sec]
A preroll time of at least 5 seconds is recommended when
using this unit for editing. When an editing control unit such as
the BVE-700A has been connected, this setting is disabled and
the setting on the editing control unit is in effect. Operations
such as preroll time setting and time data switching are also
performed on the editing control unit.
*STOP [>> STOP]: Stop mode
STILL [>> STILL]: Output still pictures in search mode.
OFF [>> OFF]: Do not record postroll.
*ON [>> ON]: Record postroll.
*OFF [>> OFF]: Disable Clip Continuous Rec.
ON [>> ON]: Enable Clip Continuous Rec.
*REC START EM [>> R.ST]: Jump to the next (when the
NEXT button is pressed) or previous (when the PREV
button is pressed) REC START essence mark.
CLIP [>> Clip]: Jump to the first frame of the next (when the
NEXT button is pressed) or previous (when the PREV
button is pressed) clip.
Description
Make settings while viewing characters on the CHARA.
POSITION (character position) screen.
To move characters up or down: Press the M/MARK1 or m/
MARK2 button.
To move characters left or right: Press the </IN or ,/OUT
button.
To return to the top level of the setup menu: Press the
MENU button.
Make settings while viewing characters on the CHARA. TYPE
(character type) screen.
*WHITE (WITH BKGD): White characters on black
background
BLACK (WITH BKGD): Black characters on white background
WHITE/OUTLINE: White characters with black outline
BLACK/OUTLINE: Black characters with white outline
To return to the top level of the setup menu: Press the
MENU button.
Specify while viewing the display on the CHARA. VSIZE
(character vertical size) screen.
*×1 [>> ×1]: Standard size
×2 [>> ×2]: 2 times standard size
To return to the top level of the setup menu: Press the
MENU button.
95
System Menu