Playback In 24P (23.98P) 2-3 Pulldown Mode - Sony 3-270-589-12 (1) Operating Instructions Manual

timecode at the start of recorded clips may not have a
number of frames that is a multiple of 4. If you want to
make sure that the number of frames in the timecode of

Playback in 24P (23.98P) 2-3 Pulldown Mode

Pulldown playback frame sequences
During pulldown mode playback, playback is carried out
so that the 24-frame timecode set with TIME CODE >PD
PRESET in the setup menu becomes the "A-frame" of the
frame sequence. The following figure shows the playback
frame sequence when 01:00:00:00 has been set for the 24-
24P Video
Frame Count
TC (24F)
Frame Seqence
60i Pulldown Video
TC (30F)
Timecode during playback of pulldown
signals
During playback of pulldown signals, timecode is
converted to 30 frames to match the 59.94i video output
signals.
The values of "24F TC" and "30F TC" under TIME CODE
>PD PRESET in the setup menu are used as the conversion
references.
To display 30-frame pulldown timecode in the
monitor video display section or on an external
monitor
1
Press the MENU button.
The system menu (see page 90) appears.
2
Press the M/MARK1 or m/MARK2 button to select
SETUP MENU.
3
Press the ,/OUT button.
The setup menu appears.
4
Press the M/MARK1 or m/MARK2 button to select
"DISPLAY CONTROL".
Timecode
conversion
24P: 1frame
reference
n-2 n-1
00:59:59:22 00:59:59:23 01:00:00:00
C-frame D-frame
60i: 1frame
09:59:59:28 09:59:59:29 10:00:00:00
the first frames of recorded clips is a multiple of 4, set the
run mode to "REC RUN", and record after manually
presetting the timecode.
frame timecode and 10:00:00:00 has been set for the 30-
frame timecode.
Note
This kind of frame sequence adjustment is not carried out
for clip list playback.
n n+1
01:00:00:01 01:00:00:02
A-frame B-frame C-frame
10:00:00:01 10:00:00:02
OPERATIONAL FUNCTION
DISPLAY CONTROL
TIME CODE
DISC PROTECTION
VIDEO CONTROL
AUDIO CONTROL
INTERFACE SELECT
METADATA
SETUP BANK OPERATION
MENU GRADE
5
Press the ,/OUT button.
The second level of the DISPLAY CONTROL menu
appears.
6
Press the M/MARK1 or m/MARK2 button to select
"DISPLAY INFO".
DISPLAY CONTROL
CHARA.POSITION
CHARA.TYPE
CHARA.VSIZE
DISPLAY INFO
SUB STATUS
MENU DISPLAY
BRIGHTNESS
ALARM
MENU STATUS
HD CHARA
n+2 n+3 n+4
01:00:00:03 01:00:00:04
D-frame A-frame
10:00:00:03 10:00:00:04 10:00:00:05
SETUP MENU
: ENHAN
SETUP MENU
:WHITE
:x1
:T&STA
:OFF
:WHITE
:55
:ON
:DIS
:ALL
24P (23.98P) Mode Settings
39