Assigning Sequence Numbers To Thumbnails - Sony 3-270-589-12 (1) Operating Instructions Manual

Assigning Sequence Numbers to
Thumbnails
You can assign sequence numbers to displayed
thumbnails.
1
With the SUB CLIP button off, press the
THUMBNAIL button, turning it on.
Thumbnails of the clips on the disc appear.
2
Press the MENU button.
The CLIP menu appears.
3
Use the V/MARK1 button to select "CLIP
INFORMATION", and then press the SET button.
A sub menu appears.
4
Use the v/MARK2 button to select "SEQUENCE
NUMBER", and then press the SET button.
As shown in the following figure, sequential numbers
are assigned to thumbnails.
61
Playback