Searching For Clips With Thumbnails (Thumbnail Search) - Sony 3-270-589-12 (1) Operating Instructions Manual

Normally, the unit enters jog mode as soon as you turn
the jog dial. If you want it to enter jog mode only when
you press the JOG button, set OPERATIONAL
FUNCTION >SEARCH ENABLE in the setup menu
to "VIA SEARCH KEY".
Playback in shuttle mode
In shuttle mode, you can control the speed of playback by
the angular position of the shuttle dial. The range of
playback speed is ±20 times normal speed.
To carry out playback in shuttle mode, proceed as follows.
F1
F2
ACCESS
F3
NETWORK
F4
CHAPTER
LOCAL
REMOTE
F5 EXPAND
LEVEL
PAGE DISPLAY
CH 1 CH 2 CH 3 CH 4 KEY INHI
PHONES
VARIABLE
REC
PRESET
PB
SHIFT
1
Press the SHUTTLE button, turning it on.
2
Turn the shuttle dial to the desired angle
corresponding to the desired playback speed.
Playback in shuttle mode starts.
3
To stop playback in shuttle mode, return the shuttle
dial to the center position, or press the STOP button.
Normally, the unit enters shuttle mode as soon as you
turn the shuttle dial.
If you want it to enter shuttle mode only when you
press the SHUTTLE button, set OPERATIONAL
FUNCTION >SEARCH ENABLE in the setup menu
to "VIA SEARCH KEY".
To alternate between normal-speed playback and
shuttle mode playback
Set the shuttle dial to the position corresponding to the
desired shuttle playback speed, then switch between
normal-speed playback and shuttle playback by pressing
the PLAY and SHUTTLE buttons alternately.
Playback in variable-speed mode
In variable-speed mode, you can control the speed of
playback in the range of –1 to +2 times normal speed.
To carry out playback in variable-speed mode, proceed as
follows.
EJECT
VAR
MARK1
MENU
IN OUT
SUB THUMB
SET RESET
CLIP NAIL JOG
CLIP ESSENCE
MENU MARK MARK2
PREV PLAY NEXT STOP REC SHUTTLE
TOP F REV F FWD END STANDBY
3 1 2,3
F1
F2
ACCESS
F3
NETWORK
F4 CHAPTER
LOCAL
REMOTE F5 EXPAND
LEVEL
PAGE DISPLAY
KEY INHI
PHONES CH 1 CH 2 CH 3 CH 4
VARIABLE
REC
PRESET
PB
SHIFT
1
Press the VAR button, turning it on.
2
Turn the shuttle dial to the desired angle
corresponding to the desired playback speed.
Playback in variable-speed mode starts.
3
To stop playback in variable-speed mode, return the
shuttle dial to the center position, or press the STOP
button.
To alternate between normal-speed playback and
variable-speed mode playback
Set the shuttle dial to the position corresponding to the
desired variable playback speed, then switch between
normal-speed playback and variable-speed mode playback
by pressing the PLAY and VAR buttons alternately.
Searching for Clips with Thumbnails
(Thumbnail Search)
You can display thumbnail images (index pictures) of all
clips on the disc, and use them to cue up a desired clip.
To display a list of thumbnail images
With the SUB CLIP button off, press the THUMBNAIL
button, turning it on.
A list appears showing thumbnails of 12 clips on the disc,
including the clip being currently played back. (In the
following description, this is referred to as the "thumbnail
screen".)
1
EJECT
VAR
MARK1
MENU
IN OUT
SUB THUMB
CLIP NAIL SET RESET JOG
CLIP ESSENCE
MENU MARK
MARK2
PREV PLAY NEXT STOP REC
SHUTTLE
TOP F REV F FWD END STANDBY
3 2,3
Playback
53