Bosch e-GoKart PowerTrain Young Star Manual page 57

6.1.4 Brake inductive sensor
6.1.5 Pressure sensor
6.1.6 Switches and LEDs
Bosch Motorsport
Check Signal:
Please check the position several times.
– Press the pedal strongly and let it jump to the resting place.
The brake inductive sensor should be fixed on the mounting. A space of 2 to 3 mm
between the sensor and the brake pedal mechanic (black metal) is necessary.
Illustration 68: Implemented brake inductive sensor
Fix the pressure sensor with a suitable tool. After implementation, the brake line must be
vented before the first drive. At the end, connect the brake pressure sensor with the wir-
ing harness (Label "p_brake").
Illustration 69: Brake pressure sensor implemented in the brake liner
The switches and LEDs are implemented in the right side wiring. All wiring harnesses are
delivered with open end wiring. Please cut the wiring on the right length and fix the com-
ponents in the metal sheet on the chassis.
e-GoKart_Powertrain__Young_Star__Manual
Wiring Harness instruction / Build up chassis | 6
57 / 60