Bosch e-GoKart PowerTrain Young Star Manual page 38

5 | Overall Integration Requirements of e-GoKart System Components into the Superior Vehicle Context
38 / 60
Illustration 28: Insulation from accessory bracket
# The nominal width of the bracket including all tolerances shall be max. 58.8 mm to en-
sure that the Power Unit PU 5-10 can be mounted adequately.
Illustration 29: Mounting points of the PU 5-10
# The parallelism between vehicle support surface and the insulation bushing surface
must be <0.05 mm.
Illustration 30: Parallelism of customer engine block (Insulation bushing not necessary)
e-GoKart_Powertrain__Young_Star__Manual Bosch Motorsport