Bosch e-GoKart PowerTrain Young Star Manual page 40

5 | Overall Integration Requirements of e-GoKart System Components into the Superior Vehicle Context
40 / 60
Illustration 32: Mounting positions and dimensions of DDU 18
# Tightening torque of 1 Nm and the screw-in depths of 6 mm shall not be exceeded.
Therefore, the length of the screws must be appropriate. Different screws lengths are pos-
sible for different mounting locations.
# It shall be ensured that the tightening for mounting at the handlebar is designed in that
way, that loosing of the screws is prevented over lifetime.
Illustration 33: Mounting of faceplate onto the DDU 18
e-GoKart_Powertrain__Young_Star__Manual Bosch Motorsport