Block Skip - Siemens Sinumerik 802D sl Programming Manual

Programming Basics
1.1 Introductory explanations
1.1.9

Block skip

The skip character "/" can be anywhere within the block, even in the middle. If the
programmed skip level is active at the moment of compiling, the block will not be
compiled from this position to the end of the block. An active skip level therefore
has the same effect as an end of block.
Example:
N5 G00 X100. /3 YY100
N5 G00 X100. /3 YY100
Skip characters within a comment are not interpreted as skip characters.
Example:
N5 G00 X100. ( /3 part1 ) Y100 ;even when skip level 3 is active, the
The skip level can be /1 to /9. Skip values <1 >9 give rise to alarm 14060
The function is mapped onto the existing Siemens skip levels. In contrast to ISO
Dialect Original, / and /1 are separate skip levels and therefore have to be
activated separately.
Notice
"1" can be omitted for "/1".
S
The optional block skip function is processed when a part program is read to
S
the buffer register from either the tape or memory. If the switch is set ON after
the block containing the optional block skip code is read, the block is not skip-
ped.
The optional block skip function is disregarded for program reading (input) and
S
punch out (output) operation.
1-16
----> Alarm 12080,
----> No alarm when skip level 3 is active
;Y axis will be traversed
SINUMERIK 802D sl/840D sl840D/840Di sl/840Di/810D ISO Turning - - 04.07 Edition
© SIEMENS AG 2007 All rights reserved
04.07