Siemens SINAMICS S120 Equipment Manual page 264

Maintenance and Servicing
8.3 Servicing
Installation device
Description
The mounting device is used for installing and removing the power blocks for the Basic Line
Modules, Smart Line Modules, Active Line Modules, and Motor Modules in chassis format.
It is used as a mounting aid and is placed in front of and secured to the module. The
telescopic rails allow the withdrawable device to be adjusted according to the height at which
the power blocks are installed. Once the mechanical and electrical connections have been
undone, the power block can be removed from the module, whereby the power block is
guided and supported by the guide rails on the withdrawable devices.
Figure 8-1
Order number
The order number for the mounting device is 6SL3766-1FA00-0AA0.
264
Installation device
Manual, (GH3), 10/2008, 6SL3097-2AE00-0BP3
Chassis power units