Events and Logs
(2 of 2)
6.8.5.3
Table 119
128
Item
Description
Parameters
eq | neq — The operator specifying the type of match. Valid operators are:
•
eq: equal to
•
neq: not equal to
application-id — The application name string.
Values: A valid application name. To display a list of valid application names, use the
applications command. Valid applications are:
bgp, debug, dhcp, filter, igmp_snooping, ip, isis, lag, ldp, logger, mirror, mpls, ospf, port, rip,
route_policy, security, snmp, stp, svcmgr, system, user, vrtr
number
number command
Item
Description
Syntax
number {eq | neq | lt | lte | gt | gte} event-id
no number
Context
configure>log>filter filter-id>entry entry-id>match
Description
This command adds an SR OS application event number as a match criterion.
SR OS event numbers uniquely identify a specific logging event within an application.
Only one number command can be entered per event filter entry. The latest number
command overwrites the previous command.
The no form of the command removes the event number as a match criterion.
Default
no event-number — No event ID match criterion is specified.
Parameters
eq | neq | lt | lte | gt | gte — This operator specifies the type of match. Valid operators are:
•
eq: equal to
•
neq: not equal to
•
lt: less than
•
lte: less than or equal to
•
gt: greater than
•
gte: greater than or equal to
event-id — The event ID, expressed as a decimal integer.
Values: 1 — 4294967295
3HH-11982-AAAA-TQZZA
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10