Events and Logs
6.6.3.1
A event log file contains information used to direct events and debug information to
their respective destinations. One or more event sources can be specified.
Use the following CLI syntax to configure an event log:
configure>log
The following displays a log file configuration example:
ALA-12>configure>log>log-id# info
----------------------------------------------
...
...
----------------------------------------------
ALA-12>configure>log>log-id#
6.6.3.2
Use the following CLI syntax to configure event control.
configure>log
The following displays an event control configuration:
A:ALA-12>configure>log# info
#------------------------------------------
echo "Log Configuration"
#------------------------------------------
..
----------------------------------------------
A:ALA-12>configure>log>filter#
6.6.3.3
Use the following CLI syntax to configure a log filter:
114
Configuring an Event Log
log-id log-id
description description-string
filter (log destination) filter-id
from {[main] [security] [change] [debug-trace]}
to session
no shutdown
log-id 2
description "This is a test log file."
filter (log destination) 1
from main security
exit
Configuring Event Control
event-control application-id [event-name|event-number]
generate [severity-level]
event-control "ospf" 2003 generate cleared
event-control "ospf" 2014 generate critical
Configuring a Log Filter
3HH-11982-AAAA-TQZZA
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10