Memory Copy Function - Panasonic GP-X Series User Manual

3.1.2 Memory Copy Function

With the memory copy function, the settings of the currently selected memory
number are duplicated to another memory. Use this function to leave most of
the settings unchanged with partial changes and use the memory switching
function.
Major applications
Keep the holding measurement conditions common and change only the
upper and lower limit judgment values.
Change only the material of the object to be detected.
*To use the memory copy function, select "Panel" for the memory
switching method setting in advance.
Reference
Refer to section "4.8Memory Switching Method Setting" on page 93.
Setting example
Duplicate the settings of memory number 0 to memory No. 2.
1) Enter "0" for the source memory number.
<Detection state> <Memory number selection>
2) Return to memory number selection and select "copy".
3) Enter "2" as the destination
memory number.
4) The data of memory number 0 is duplicated into memory No. 2.
5) After copying, memory number 2 becomes the current memory number.
Use or to select "copy".
Set
Use or to select "2".
Press to copy. Press to return.
47