8) Model type 1 setting (Level 2)
Rejection conditions
Setting start operation method
Setting change operation method : After entering the setting start operation mode, operating the UP
Example:
Setting confi rm operation method : After entering the setting start operation or setting change operation
Setting cancel operation method
Setting range
0
3WAY MULTI
1
•
2
•
9) Model 2 setting (Level 2)
Rejection conditions
Operations to start settings
Operations to amend settings
Example:
Setting confi rm operation method : Press the SET (S007) key for one second after starting the settings
Setting cancel operation method
Setting range
0
Standard
1
W MULTI
2
3WAY MILTI
3
(No current setting)
4
Standard Panasonic model
5
W-Multi Panasonic model
6
3WAY Panasonic model
7
(No current setting)
10) Region setting (Level 2)
Rejection conditions
Setting start operation method
Setting change operation method : After entering the setting start operation mode, operating the UP
Example:
Setting confi rm operation method : After entering the setting start operation or setting change operation
Setting cancel operation method
Setting range
0
Europe
: Not accepted during indoor operation
: Press the SET (S007) key for one second.
(S005) and DOWN (S006) keys makes it possible to change the setting
values. (TEST/WARNING LED light)
: When pressing the UP (S005) key
: When pressing the DOWN (S006) key
completed, press the SET (S007) key for one second. (TEST/
WARNING LED off)
: Press the HOME (S004) key for one second before confi rming setting.
: 00 to 02
•
•
: Cannot be accepted when the indoor unit is operating.
: Press the SET (S007) key for one second.
: After performing the operations to start the settings, press the UP
(S005) and DOWN (S006) keys to change the set values. (The TEST/
WARNING LED will be illuminated.)
: When the UP (S005) key is pressed
: When the DOWN (S006) is pressed
or after amending the settings. (The TEST/WARNING LED will be
extinguished.)
: Press the HOME (S004) key for one second before entering the
settings.
: 00 to 07
: Not accepted during indoor operation
: Press the SET (S007) key for one second.
(S005) and DOWN (S006) keys makes it possible to change the setting
values. (TEST/WARNING LED light)
: When pressing the UP (S005) key
: When pressing the DOWN (S006) key
completed, press the SET (S007) key for one second. (TEST/
WARNING LED off)
: Press the HOME (S004) key for one second before confi rming setting.
: 00 to 02
V–39