2 PREPARATION
2.4 Setting Various Functions
Configuring in Setup Menu Mode
Start the transceiver in Setup menu mode to configure various functions.
1
If the unit is turned on, turn off the power by pressing and holding the
goes off.
2
While pressing the
For WD-K10PBS, press until the Status LED blinks in orange.
For WD-K10TR, press until the Status LED blinks in green.
The Setup menu mode is activated.
After the voice announcement for the activation of the Setup menu mode is played, a voice announcement for the
initial setup items will be played.
3
Press the [J], [K] key and select an item to configure.
A voice announcement will be played for the item name every time an item is switched.
[PTT]
key, turn on the power by pressing and holding the
Status LED
[Power]
key until the Status LED
[Power]
key.
[Power] key
Contents
41