Registering The Device - Kenwood WD-K10 Series User Manual

2 PREPARATION

2.3 Registering the Device

2.3 Registering the Device
Registering Sub Unit to Base Unit
This system is used when the transceiver to be used as a sub unit is registered to the Portable base WD-K10PBS or Base
station WD-K10BS that is to be used as the base unit.
Precautions
0
Up to 108 sub units can be registered to one base unit. Registration may fail if you try to register more than the maximum
number of sub units to a base unit.
Note
The Portable base WD-K10PBS (Transceiver Mode only) or Transceiver WD-K10TR can be registered as a sub unit.
0
Perform registration for each device one at a time.
0
Or
Base Unit
Register side by side
Sub Unit
Contents
34