Base Station Wd-K10Bs - Kenwood WD-K10 Series User Manual

1 INTRODUCTION
1.8 Part Names and Functions (Device Connection Method)

Base Station WD-K10BS

FRONT
A
B
C
Status LED
A
Indicates the status of the base station with the LED color.
Antenna
B
For registering sub units to the base station through wireless communication.
[Registration] key
C
Cover (DC plug area)
D
Remove the cover when connecting the AC adapter to the DC IN jack or when the data setting connector and baselink
terminal block are used.
Packing (Setting/ adjust area)
E
Remove this when connecting external audio equipment, adjusting volume, or using the Mode select switch.
Mounting Plate
For use when installing the base station to the wall or ceiling.
REAR
D
Contents
E
15