Table of Contents
Advertisement
2
To set monitors for MSD temperature and vacuum status
To set monitors for MSD temperature and vacuum status
Monitors display the current value of a single instrument parameter. They can be
added to the standard instrument control window. Monitors can be set to change
color if the actual parameter value varies beyond a user-determined limit from the
parameter setpoint. This procedure describes how to add monitors to your instru-
ment control view.
Software changes
The software is revised periodically. If the steps in this procedure do not match
your MSD ChemStation software, refer to the manuals and online help supplied
with the software for more information.
1 Select
2 In the Edit MS Monitors box, under Type, select
3 Under Parameter, select
4 Under Parameter, select
5 Under Parameter, select
6 Click
The new monitors will be stacked on top of each other in the lower right corner of
the Instrument Control window. They must be moved for you to see them all.
7 Click and drag each monitor to the desired position.
See the accompanying illustration for an example of arranging the monitors.
8 To make the new settings part of the method, select
menu.
38
Operating the MSD
MS Monitors
from the Instrument menu.
.
OK
and click
MS Source
Add
and click
.
MS Quad
Add
(or
) and click
Foreline
TurboSpd
.
Zone
.
.
Add
Save
from the Method
Advertisement
Table of Contents
