Configuring The Ethernet Interface - Bosch AMC2 Series Installation Manual

AMC2 Modular
Controller
6.2

Configuring the Ethernet Interface

To configure the AMC2-4W in a TCP/IP network environment,
use the AmcIpConfig tool provided in the following directory on
the standalone or the remote server of the Building Integration
System:
\\Runtime-drive:\MgtS\AccessEngine\AC\bin
The access control system Access Personal Edition has an entry
of this tool in its program folder:
Start > Programs > Access Personal Edition >
AmcIpConfig
This tool can be copied and used on every computer on the
network.
Notice!
Use only alphanumeric characters plus the seperator "-" (minus/
dash).
Do not use special characters or spaces.
The network name must start with a letter.
The names are not case sensitive.
Notice!
Consult the AmcIpConfig tool's own online help for details on
configuring the AMC2-4W .
Bosch Access Systems GmbH
Operating | en
2018-09 | AMC2-4W_UL |
55