Bosch AMC2 Series Installation Manual page 22

22 en | Introduction
–
–
–
–
–
–
Using Wiegand reader interfaces, up to four peripheral devices
can be connected to each AMC2-4W. The interfaces are point-to-
point connections, meaning that only one reader can be
connected to one interface.
The extension interface supports up to three additional I/O
boards (AMC2-8IOE, or AMC2-16IOE) . All extension boards are
controlled by the AMC2 and are freely combinable.
Notice!
To build a UL listed system you have to use the software APE
3.4 or 3.5 or the BIS/ACE 4.5.
2018-09 | AMC2-4W_UL |
one PC with access control software
up to 128 AMC2-4W controllers
each controller can be extended with up to three
AMC2-8IOE or AMC2-16IOE input/output modules
each controller can be extended with one AMC2-4WE
extension module
the necessary number of Bosch APS-PSU-60 power supply
the necessary number of AMC2-UL01 or AMC2-UL02
enclosures
AMC2 Modular
Controller
Bosch Access Systems GmbH