AMC2 Modular
Controller
4
Installing
Notice!
To build a UL listed configuration, refer to UL Requirements,
page 45
4.1
Mounting
The AMC2-4W can be attached on a standard 35 mm (1.377 in.)
mounting rail using a snap-in mechanism. Attach the AMC2-4W
into the upper edge of the mounting rail [1], then push down
the device and snap it onto the rail by pushing it towards the
back [2].
Figure 4.1: Mounting the AMC2 on a mounting rail
Bosch Access Systems GmbH
Installing | en
2018-09 | AMC2-4W_UL |
23