Connecting Relay Outputs - Bosch AMC2 Series Installation Manual

AMC2 Modular
Controller
4.11

Connecting Relay Outputs

To operate locks or alarm systems, the AMC2-4W has eight relay
outputs. The outputs will be connected to the 3-pin pluggable
screw connectors S5, S6, S10, S11, S17, S18, S22, and S23 -
refer to chapter Connecting Diagrams, page 63.
Figure 4.11: Location of the relay output connectors
Each relay output can operate in 'wet' mode, using the
AMC2-4W 's internal 12/24 Vdc power supply for external
devices or 'dry' mode with potential free contacts for externally
powered systems.
Bosch Access Systems GmbH
Installing | en
2018-09 | AMC2-4W_UL |
37