38
en | Operating
5.2
Configuring the Ethernet Interface
To configure the AMC2-4R4 in a TCP/IP network environment, use the AmcIpConfig tool
provided in the following directory on the standalone or the remote server of the Building
Integration System:
\\Runtime-drive:\MgtS\AccessEngine\AC\bin
The access control system Access Personal Edition has an entry of this tool in its program
folder:
Start > Programs > Access Personal Edition > AmcIpConfig
This tool can be copied and used on every computer on the network.
Notice!
Use only alphanumeric characters plus the seperator "-" (minus/dash).
Do not use special characters or spaces.
The network name must start with a letter.
The names are not case sensitive.
Notice!
Consult the AmcIpConfig tool's own online help for details on configuring the AMC2-4R4.
2018-02 | AMC2-4R4 |
Installation Manual
AMC2 Modular Controller
Bosch Access Systems GmbH