Trigger; [:Immediate] - HP E1351A User Manual

TRIGger

Subsystem Syntax

[:IMMediate]

Comments
Example
Chapter 5
The
TRIGger
the multiplexer modules.
TRIGger
[:IMMediate]
:SOURce BUS | DBUS | EXTernal | HOLD | IMMediate
:SOURce?
TRIGger[:IMMediate]
source is
TRIGger:SOURce HOLD
TRIGger[:IMM]
•
Executing the
must be defined with the
and an
TRIGger[:IMMediate]
•
HOLD
HOLD
triggering the switchbox with the
•
Related Commands:
Advancing Scan using the
TRIG:SOUR HOLD
SCAN (@100:115)
INIT
loop statement
TRIG
increment loop
HP E1351A/53A 16-Channel FET Multiplexer Command Reference
subsystem commands control the scan triggering operation of
causes a trigger to occur when the defined trigger
or
is not the same as
TRIGger:SOURce IMM
TRIGger[:IMMediate]
[ROUTe:]SCAN <
INITiate[:IMMediate] command must be executed before
can trigger the switchbox.
or Source Remains: If selected, the
BUS
or
TRIGger:SOURce BUS
INITiate
TRIGger
TRIGger:SOURce BUS
.
Command: A channel list
channel_list
TRIGger:SOURce
commands remain in effect after
TRIGger[:IMMediate]
,
[ROUTe:]SCAN
Command
Sets trigger source to hold.
Sets channel list.
Starts scanning cycle.
Start count loop.
Advances scan to next channel.
Increment count loop.
. Note that
> command
command.
73